Heavy-duty horizontal slurry pump
HA double-casing configuration with replaceable wet ends for abrasive mineral processing, mill discharge and tailings duties.
01 / CONSTRUCTION
DESIGN FOLLOWS DUTY
- Configuration
- Single-stage, single-suction, cantilever horizontal centrifugal
- Speed range
- 200–3800 r/min
- Published power range
- 15–1200 kW
- Wet-end materials
- High-chrome alloy or rubber wet ends; selected for the medium
- Shaft sealing
- Packing / expeller / mechanical seal
- Installation & drive
- Direct or belt drive; grease- or oil-lubricated bearing assembly
01Replaceable liners
02Discharge orientation at 45° intervals
03Large-diameter, short-overhang shaft
02 / CLEAR-WATER REFERENCES
READ THE DATA
KEEP THE CONTEXT
| Model | Material | Q m³/h | H m | n r/min | Max. powerkW | η % | NPSH m |
|---|---|---|---|---|---|---|---|
| PG-H-01 | M | 12.6–28.8 | 6–68 | 1200–3800 | 15 | 40 | 2–4 |
| PG-H-02 | M | 39.6–89.4 | 12–64 | 1300–2700 | 30 | 55 | 4–6 |
| PG-H-03 | M | 162–360 | 12–56 | 800–1800 | 60 | 65 | 3–5 |
| PG-H-04 | M | 2520–5400 | 13–57 | 200–400 | 1200 | 85 | 5–10 |
4 models
Selected metal wet-end models are shown. Rubber versions have separate duty ranges and must not inherit metal-version data.
Q: flow; H: head; n: speed; η: efficiency. M denotes the catalog metal code. “—” means unavailable. Maximum power is not absorbed duty power; The high-head, vertical and gravel series list it maximum belt-drive power. Rows are not complete curves. Apply slurry corrections, cavitation checks and motor sizing.
- Flow, head and system curve
- Density, concentration and particle distribution
- Temperature, pH and material compatibility
- Available NPSH, seal water and installation space
Can rubber and metal versions be substituted directly?+
The catalog lists both; materials, clearances and performance still require model-specific confirmation.